Reference Guide

Related
Commands
show config – displays the current ACL configuration.
resequence access-list
Re-assign sequence numbers to entries of an existing access-list.
S5000
Syntax
resequence access-list {ipv4 | ipv6 | mac} {access-list-name
StartingSeqNum Step-to-Increment}
Parameters
ipv4 | ipv6 |
mac
Enter the keyword ipv4, ipv6 or mac to identify the access
list type to resequence.
access-list-
name
Enter the name of a configured IP access list, up to 140
characters.
StartingSeqNu
m
Enter the starting sequence number to resequence. The
range is 0 to 4294967290.
Step-to-
Increment
Enter the step to increment the sequence number. The
range is 1 to 4294967290.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
When all sequence numbers have been exhausted, this feature permits re-
assigning new sequence number to entries of an existing access-list.
Related
Commands
resequence prefix-list ipv6 – resequences a prefix list.
resequence prefix-list ipv6
Re-assign sequence numbers to entries of an existing prefix list.
S5000
Syntax
resequence prefix-list ipv6 {prefix-list-name StartingSeqNum
Step-to-increment}
668
IPv6 Access Control Lists (IPv6 ACLs)