Reference Guide

show arp
Display the ARP table.
S5000
Syntax
show arp [inspection | interface type slot/port | ip ip-address
[mask] | macaddress mac-address [mac-address mask] | retries]
[static | dynamic] [summary]
Parameters
inspection (OPTIONAL) Enter the keyword inspection followed by
database or statistics to view dynamic ARP inspection
details.
interface type
slot/port
(OPTIONAL) Enter the interface keyword followed by the
interface type and slot/port or number information. Valid slot
numbers are 0-11. The valid port numbers for each interface
type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
• For a Management interface, enter the keyword
managementethernet followed by slot/port numbers.
The port is 0.
• For a Port Channel interface, enter the keywords port-
channel
followed by a number from 1 to 128.
• For a VLAN interface, enter the keyword vlan followed
by a VLAN id number from 1 to 4094.
ip ip-address
mask
(OPTIONAL) Enter the keyword ip followed by an IP address
in the dotted decimal format. Enter the optional IP address
mask in the slash prefix format (/ x).
macaddress
mac-address
mask
(OPTIONAL) Enter the keyword macaddress followed by a
MAC address in nn:nn:nn:nn:nn:nn format. Enter the
optional MAC address mask in nn:nn:nn:nn:nn format also.
retries (OPTIONAL) Enter the keyword retries to view the number
of ARP retries before a 20 sec back off.
static (OPTIONAL) Enter the keyword static to view entries
entered manually.
dynamic (OPTIONAL) Enter the keyword dynamic to view dynamic
entries.
summary (OPTIONAL) Enter the keyword summary to view a summary
of ARP entries.
IPv4 Routing
627