Reference Guide

ip domain-list
Configure names to complete unqualified host names.
S5000
Syntax
ip domain-list name
To remove the name, use the no ip domain-list name command.
Parameters
name Enter a domain name to be used to complete unqualified
names (that is, incomplete domain names that cannot be
resolved).
Defaults Disabled.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Configure the ip domain-list command up to six times to configure a list of
possible domain names.
If you configure both the ip domain-name and ip domain-list commands,
the software tries to resolve the name using the
ip domain-name command. If
the name is not resolved, the software goes through the list of names configured
with the ip domain-list command to find a match.
Use the following steps to enable dynamic resolution of hosts:
• specify a domain name server with the ip name-server command
• enable DNS with the ip domain-lookup command
To view current bindings, use the show hosts command. To view DNS related
configuration, use the show running-config resolve command.
Related
Commands
ip domain-name – specifies a DNS server.
ip domain-lookup
Enable dynamic host-name to address resolution (that is, DNS).
S5000
Syntax
p domain-lookup
To disable DNS lookup, use the no ip domain-lookup command.
IPv4 Routing
615