Reference Guide

Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example
ICMP: echo request rcvd from src 40.40.40.40
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: echo request sent to dst 40.40.40.40
ICMP: echo request rcvd from src 40.40.40.40
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: echo request sent to dst 40.40.40.40
Usage
Information
Use the count option to stop packets from flooding the user terminal when
debugging is turned on.
debug ip packet
View a log of IP packets sent and received.
S5000
Syntax
debug ip packet [access-group name] [count value] [interface-
type slot/port]
To disable debugging, use the no debug ip packet [access-group name]
[count
value] [interface-type slot/port] command.
Parameters
access-group
name
Enter the keyword access-group followed by the access
list name (maximum 16 characters) to limit the debug output
based on the defined rules in the ACL.
count value (OPTIONAL) Enter the keyword count followed by the count
value. The range is 1 to 65534. The default is
Infinity.
interface-type
slot/port
(OPTIONAL) Enter the interface type and slot/port or number
information. Valid slot numbers are 0-11. The valid port
numbers for each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
• For a Management interface, enter the keyword
managementethernet followed by slot/port numbers.
The port is 0.
• For a Port Channel interface, enter the keywords port-
channel
followed by a number from 1 to 128.
IPv4 Routing
611