Reference Guide

show ip route summary – views a summary of the routing table.
clear tcp statistics
Clear TCP counters.
S5000
Syntax
clear tcp statistics
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
debug arp
View information on ARP transactions.
S5000
Syntax
debug arp [interface-type slot/port] [count value]
To stop debugging ARP transactions, use the no debug arp command.
Parameters
interface-type
slot/port
(OPTIONAL) Enter the interface type followed by slot/port or
number information. Valid slot numbers are 0-11. The valid
port numbers for each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
• For a Management interface, enter the keyword
managementethernet followed by slot/port numbers.
The port is 0.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
• For a VLAN interface, enter the keyword vlan followed
by a VLAN id number from 1 to 4094.
count value (OPTIONAL) Enter the keyword count followed by the count
value. The range is 1 to 65534.
608
IPv4 Routing