Reference Guide

Usage
Information
You cannot use Class D or Class E IP addresses or zero IP address (0.0.0.0) when
creating a static ARP. Zero MAC addresses (00:00:00:00:00:00) are also invalid.
Related
Commands
clear arp-cache – clears dynamic ARP entries from the ARP table.
show arp – displays the ARP table.
arp learn-enable
Enable ARP learning using gratuitous ARP.
S5000
Syntax
arp learn-enable
Defaults Disabled
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
arp retries
Set the number of ARP retries in case the system does not receive an ARP reply in response to an ARP
request.
S5000
Syntax
arp retries number
Parameters
number Enter the number of retries. The range is 5 to 20. The default
is 5.
Defaults 5
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Retries are 20 seconds apart.
604
IPv4 Routing