Reference Guide

Parameters

stack-unit unit-

number

Enter the keywords stack-unit then the unit number. The

range is from 0 to 11.

port-group

number

Enter the keywords port-group then the number of the

port-group. The range is from 0 to 5.

portmode Enter the keyword portmode then the keyword ethernet

to enable Ethernet mode.

Command

Modes

CONFIGURATION

Command

History

Version 9.1(1.0) Introduced on the S5000.

Example

Dell(conf)#stack-unit 0 port-group 0 portmode ethernet

Changing port mode on slot 0 port-group 0 will make interface

configs of 0 and 1 obsolete after a save and reload.

[confirm yes/no]:yes

Please save and reload for the changes to take effect.

Dell(conf)#

Commands

show stack-unit port-group portmode — displays the fibre channel port-group

mode information.

602

Fibre Channel Interface Commands