Reference Guide

Fibre Channel Interface Commands

The following commands are supported for Fibre Channel operation on the S5000.

fabric

Configure the SAN fabric to which a Fibre Channel port connects.

S5000

Syntax

fabric fcoe-map

Parameters

fcoe-map Enter the name of the FCoE map which contains the

FCoE/FC fabric to which the Fibre Channel port connects.

Defaults None

Command

Modes

INTERFACE FIBRE_CHANNEL

Command

History

Version 9.0(1.3) Introduced on the S5000.

Usage

Information

Use the fcoe-map command to bind an FC port to an FC-FCOE fabric.

When a Fibre Channel port operates in N mode, the principal switch in the fabric

provides the FCoE Forwarder (FCF) attributes, such as MAC address, FIP priority,

and FIP keepalive timeout.

To removed the configured FCoE map, enter the no fabric command.

Example

Dell(conf)#interface fibrechannel 0/11

Dell(conf-if-fc-0/11)#fabric SAN_FABRIC_A

Commands

interface fibrechannel — configures a Fibre Channel interface on the switch.

show interfaces fibrechannel — displays the configuration of a Fibre Channel

interface.

Fibre Channel Interface Commands

593