Reference Guide

Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use the show fc-trace-level command to display the current trace level used
to record FC information in the FC trace file, where:
• 0: FC traces are turned off.
• 1: FC error messages are recorded.
• 2: FC warning messages are recorded.
• 3: FC informational messages are recorded.
• 4: All messages generated for FC operation on the switch are recorded.
To set the FC trace level, use the change fc-trace-level command.
Example
Dell#show fc-trace-level
FC Trace Level = 4 (All)
Dell#
Related
Commands
change fc-trace-level— changes the FC trace level used to record FC information
in the trace log.
show fc zone
Display the configured zone.
S5000
Syntax
show fc zone [zonename ]
Parameters
zonename
Enter the zone name to display the details.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.1(1.0) Introduced on the S5000.
Example
Dell#show fc zone
ZoneName ZoneMember
=======================================================
brcd_sanb
brcd_cna1_wwpn1
590
Fabric Services Commands