Reference Guide

• Warning!!: Existing fabric configuration detected,
proceeding to REBOOT switch :Continue? [yes/no]:
– no – Does not reboot the switch.
– yes – Reboots the switch and prompts the user to save the running config.
If no fcoe-map exists, the switch-mode moves to the newly configured switch-
mode without any warning messages.
Example
Dell(conf)# fc switch-mode fabric-services
Related
Commands
show fc switch — displays FC switch parameters.
fc zone
Create a zone.
S5000
Syntax
fc zone zonename
To delete a zone, use the no fc zone zonename command.
Parameters
zonename Enter the zone name.
Command
Modes
CONFIGURATION
Command
History
Version 9.1(1.0) Introduced on the S5000.
Example
Dell(conf)# fc zone z1
Dell(conf-fc-zone-z1)#
Related
Commands
show fc zone — displays the configured zone.
show fcoe-map — displays the fabric parameters.
fc zoneset
Create a zoneset.
S5000
Syntax
fc zoneset zoneset_name
To delete a zoneset, use the no fc zoneset zoneset_name command.
Fabric Services Commands
579