Reference Guide

Parameters
ZoneAliasName Enter the zone alias name.
Command
Modes
CONFIGURATION
Command
History
Version 9.1(1.0) Introduced on the S5000.
Example
Dell(conf)#fc alias za1
Dell(conf-fc-alias-za1)#
Related
Commands
show fc alias — displays the configured alias.
fc switch-mode fabric-services
Change the switch mode from NPIV Gateway (NPG) mode to Fabric-Services mode.
S5000
Syntax
fc switch-mode fabric-services
To change from Fiber Channel Forwarder (FCF) mode to Fabric-Services mode, use
the no feature fc command. To change from FCF to NPG mode, use the no
feature fc command and then the feature fc command
Parameters
fabric-services Enter the keywords fabric-services to configure fabric
services mode.
Defaults Disabled
Command
Modes
CONFIGURATION
Command
History
Version 9.1(1.0) Introduced on the S5000.
Usage
Information
All Fabric-Services mode CLI commands are enabled after changing to Fabric-
Services mode.
When you run the fc switch-mode fabric-services command, the following
warning message displays:
• Warning!!: Switch mode in running-config will be changed to
'fabric-services' :Continue? [yes/no]:
– no – No effect on the running-config.
– yes – Changes the running-config to reflect the new switch-mode.
If an fcoe-map exists, the following warning message displays:
578
Fabric Services Commands