Reference Guide

Parameters
number Trace level used to record FC information in the dump file.
Range: 1 to 4, where:
• 0 turns FC traces off.
• 1 records FC error messages.
• 2 records FC warning messages.
• 3 records FC informational messages.
• 4 records all messages generated for FC operation on the
switch.
Default: 4.
Defaults Trace level 4: All FC error messages on the switch are recorded in the FC dump file.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use this command to specify the level of trace information to be included in the FC
trace log. To display the trace log, enter the show file fcmfs:/
TRACE_LOG_FC/qstack_trace.log command.
Example
Dell#change fc-trace-level 2
Related
Commands
show fc-trace-level— displays the currently configured FC trace level.
clear counters fibrechannel
Clear Fibre Channel statistics for an FC port.
S5000
Syntax
clear counters fibrechannel slot/port
Parameters
slot/port For slot, enter the stack-unit number assigned to the switch.
The range of slot (stack-unit) numbers is 0 to 11. The range
of port numbers is 0 to 47.
Defaults None
Command
Modes
CONFIGURATION
576
Fabric Services Commands