Reference Guide

23
Fabric Services Commands
The following commands are supported for Fabric Services operation on the S5000.
active-zoneset
Activate the zoneset.
S5000
Syntax
active-zoneset zoneset_name
To change to the default zone behavior, use the no active-zoneset
zoneset_name command.
Parameters
zoneset_name Enter the zoneset name.
Command
Modes
FC FABRIC CONFIGURATION
Command
History
Version 9.1(1.0) Introduced on the S5000.
Example
Dell(conf)# fcoe-map default_full_fabric
Dell(conf-fcoe-default_full_fabric)# fc-fabric
Dell(conf-fmap-default_full_fabric-fcfabric)# active-zoneset
zs1
Related
Commands
show fc zoneset — displays the configured and active zoneset.
change fc-trace-level
For debugging purposes, change the FC trace level used to record FC information in the trace log.
S5000
Syntax
change fc-trace-level number
Fabric Services Commands
575