Reference Guide

Parameters
outgoing-port-
channel
number
Enter the keywords outgoing-port-channel followed by
the number of the port channel to display flow information.
For a Port Channel interface, enter the keywords port-
channel
followed by a number. The range is 1 to 128.
incoming-
interface
interface
Enter the keywords incoming-interface followed by the
interface type and slot/port or number information:
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
source-ip
address
Enter the keywords source-ip followed by the IP source
address in IP address format.
destination-ip
address
Enter the keywords destination-ip followed by the IP
destination address in IP address format.
source-port
number
Enter the keywords source-port followed by the source
port number. The range is 1 to 65536. The default is
None.
destination-
port number
Enter the keywords destination-port followed by the
destination port number. The range is 1 to 65536. The
default is None.
source-mac
address
Enter the keywords source-mac followed by the MAC
source address in the nn:nn:nn:nn:nn:nn format.
destination-
mac address
Enter the keywords destination-mac followed by the MAC
destination address in the nn:nn:nn:nn:nn:nn format.
Command
Modes
EXEC
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Because this command calculates based on a Layer 2 hash algorithm, use this
command to display flows for switched Layer 2 packets, not for routed packets
(use the show ip flow command to display routed packets).
The show port-channel-flow command returns the egress port identification
in a given port-channel if a valid flow is entered. A mismatched flow error occurs if
MAC-based hashing is configured for a Layer 2 interface and you are trying to
display a Layer 3 flow.
The output displays three entries:
• Egress port for unfragmented packets.
Interfaces
569