Reference Guide

Defaults none
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
This feature groups two LAGs to work in tandem as a supergroup. For example, if
one LAG goes down, the other LAG is taken down automatically, providing an
alternate path to reroute traffic, avoiding oversubscription on the other LAG. You
can use both static and dynamic (LACP) LAGs to configure failover groups. For
more information, refer to the “Port Channel” chapter in the
Dell Networking OS
Configuration Guide.
Related
Command
group – groups two LAGs in a supergroup (“fate-sharing group”).
show interfaces port-channel – displays information on configured Port Channel
groups.
show config
Display the current configuration of the selected LAG.
S5000
Syntax
show config
Command
Modes
INTERFACE PORTCHANNEL
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example
Dell(conf-if-po-1)#show config
!
interface Port-channel 1
no ip address
shutdown
Dell(conf-if-po-1)#
Interfaces
565