Reference Guide

Example
Dell#show interfaces status
Port Description Status Speed Duplex Vlan
Te 0/0 Up 10000 Mbit Full --
Te 0/1 Down Auto Auto --
Te 0/2 Down Auto Auto --
Te 0/3 Down Auto Auto --
Te 0/4 Down Auto Auto --
Te 0/5 Down Auto Auto --
Te 0/6 Up 10000 Mbit Full 100
Te 0/7 Up 10000 Mbit Full --
Te 0/8 Down Auto Auto --
Te 0/9 Down Auto Auto --
Te 0/10 Down Auto Auto --
Te 0/11 Up 10000 Mbit Full 100
Te 0/24 Down Auto Auto --
Te 0/25 Down Auto Auto --
Te 0/26 Up 10000 Mbit Full --
Te 0/27 Up 10000 Mbit Full --
Te 0/28 Up 10000 Mbit Full --
Te 0/29 Up 10000 Mbit Full --
Te 0/30 Down Auto Auto --
Te 0/31 Down Auto Auto --
Te 0/32 Down Auto Auto --
Te 0/33 Down Auto Auto --
Te 0/34 Down Auto Auto --
Te 0/35 Down Auto Auto --
Fo 0/48 Down 40000 Mbit Auto --
Fo 0/52 Down 40000 Mbit Auto --
Fo 0/56 Down 40000 Mbit Auto --
Fo 0/60 Down 40000 Mbit Auto --
Dell#
Related
Commands
show interfaces – displays information on a specific physical interface or virtual
interface.
show interfaces switchport
Display only virtual and physical interfaces in Layer 2 mode. This command displays the Layer 2 mode
interfaces’ IEEE 802.1Q tag status and VLAN membership.
S5000
Syntax
show interfaces switchport [interface-type slot/port ] | backup
| stack-unit unit-number ]
Parameters
interface-type
slot/port
(OPTIONAL) Enter the interface type followed by slot/port or
number information. Valid slot numbers are 0-11. The valid
port numbers for each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
Interfaces
549