Reference Guide

• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel
followed by a number from 1 to 128.
summary (OPTIONAL) Enter the keyword summary to display the
current summary of dampening data, including the number
of interfaces configured and the number of interfaces
suppressed, if any.
detail (OPTIONAL) Enter the keyword detail to display detailed
interface dampening data.
Defaults none
Command
Modes
EXEC
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example
Dell#show interfaces dampening
Interface Supp Flaps Penalty Half-Life Reuse Suppress Max-Sup
State
Te 3/2 Up 0 0 20 800 4500 120
Te 3/10 Up 0 0 5 750 2500 20
Dell#
Related
Commands
dampening – configures dampening on an interface.
show interfaces – displays information on a specific physical interface or virtual
interface.
show interfaces configured – displays any interface with a non-default
configuration.
show interfaces description
Display the descriptions configured on the interface.
S5000
Syntax
show interfaces [type slot/port] description
Parameters
interfaces type
slot/port
(OPTIONAL) Enter the interfaces keyword followed by the
interface type and slot/port or number information, then
enter the description keyword.. Valid slot numbers are
0-11. The valid port numbers for each interface type are
listed below.
544
Interfaces