Reference Guide

Example
(ManagementE
thernet)
Dell#show interfaces managementethernet 0
ManagementEthernet 0/0 is up, line protocol is up
Hardware is DellEth, address is 5c:f9:dd:ee:ff:c2
Current address is 5c:f9:dd:ee:ff:c2
Pluggable media not present
Interface index is 436486344
Internet address is 10.1.1.1/16
Virtual-IP is not set
Virtual-IP IPv6 address is not set
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed 100 Mbit, Mode full duplex
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 3d21h47m
Queueing strategy: fifo
Input 276762 packets, 23957349 bytes, 265199 multicast
Received 0 errors, 0 discarded
Output 8521 packets, 2229204 bytes, 9 multicast
Output 0 errors, 0 invalid protocol
Time since last interface status change: 3d21h47m
Related
Commands
show interfaces configured – displays any interface with a non-default
configuration.
show interfaces stack-unit – displays information on all interfaces on a specific
stack-unit.
show interfaces switchport – displays Layer 2 information about the interfaces.
show inventory – displays the switch type, components (including media), Dell
Networking OS version including hardware identification numbers, and configured
protocols.
show ip interface – displays Layer 3 information about the interfaces.
show stack-unit – displays the status of the stack-unit(s).
show range – displays all interfaces configured using the interface range
command.
show interfaces configured
Display any interface with a non-default configuration.
S5000
Syntax
show interfaces configured
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example
Dell#show interfaces configured
TenGigabitEthernet 0/10 is up, line protocol is up
542
Interfaces