Reference Guide

Defaults 299 seconds
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The output of the show interfaces command displays the configured rate
interval, along with the collected traffic data.
Related
Commands
show interfaces – displays information on physical and virtual interfaces.
show config
Display the interface configuration.
S5000
Syntax
show config
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example
Dell(conf-if)#show conf
!
interface TenGigabitEthernet 0/0
ip address 10.1.1.1/16
portmode hybrid
switchport
dcb-policy input pfc3
no shutdown
Dell(conf-if)#
show config (from INTERFACE RANGE mode)
Display the bulk configured interfaces (interface range).
S5000
Syntax
show config
Command
Modes
INTERFACE
Interfaces
537