Reference Guide

Related
Commands
interface ManagementEthernet — configures the Management port on the system
(either the primary or standby stack-unit).
ecmp-group
Provides a mechanism to monitor traffic distribution on a link aggregation group (LAG) bundle. A system
log or simple network management protocol (SNMP) trap is generated when the standard deviation of
traffic distribution on a member link exceeds a defined threshold.
S5000
Syntax
ecmp-group {ecmp-path} [interface interface] [monitoring
enable]
To negate a command, use the no command.
Parameters
ecmp-path Enter the path number for the LAG. The range is 2 to 64.
interface Enter the following keywords and slot/port to add the
interface to the LAG:
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
monitoring Enter the keyword monitoring to monitor the LAG. To
enable monitoring, follow by entering the keyword
enable.
Defaults Off
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Interfaces
519