Reference Guide

• For a Fibre Channel interface, enter the keyword
fibrechannel followed by slot/port numbers. The port
range is 0 to 47.
vrrp [[ipv6] vrid] (OPTIONAL) Enter the keyword vrrp to clear the counters of
all VRRP groups. To clear the counters of VRRP groups on all
IPv6 interfaces, enter
ipv6. To clear the counters of a
specified group, enter a VRID number from 1 to 255.
learning-limit (OPTIONAL) Enter the keywords learning-limit to clear
unknown source address (SA) drop counters when MAC
learning limit is configured on the interface.
Defaults Without an interface specified, the command clears all interface counters.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example
Dell#clear counters
Clear counters on all interfaces [confirm]
Related
Commands
show interfaces – displays information on the interfaces.
clear dampening
Clear the dampening counters on all the interfaces or just the specified interface.
S5000
Syntax
clear dampening [interface-type slot/port]
Parameters
interface-type
slot/port
(OPTIONAL) Enter the interface type followed by slot/port or
number information. Valid slot numbers are 0-11. The valid
port numbers for each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
514
Interfaces