Reference Guide

• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
Defaults Not configured.
Command
Modes
INTERFACE VLAN — (conf-if-vl-n)
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Dell Networking OS provides the capability of statically configuring the interface to
which a multicast router is attached. To configure a static connection to the
multicast router, enter the ip igmp snooping mrouter interface command
in the VLAN context. The interface to the router must be a part of the VLAN where
you are entering the command.
ip igmp snooping querier
Enable IGMP querier processing for the VLAN interface.
S5000
Syntax
ip igmp snooping querier
To disable IGMP querier processing for the VLAN interface, use the no ip igmp
snooping querier
command.
Defaults Not configured.
Command
Modes
INTERFACE VLAN — (conf-if-vl-n)
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
This command enables the IGMP switch to send General Queries periodically. This
is useful when there is no multicast router present in the VLAN because the
multicast traffic does not need to be routed. You must assign an IP address to the
VLAN interface for the switch to act as a querier for this VLAN.
510
Internet Group Management Protocol (IGMP)