Reference Guide

Defaults none
Command
Modes
CONFIGURATION (conf-if-interface-slot/port)
Command
History
Version 9.0(1.3) Introduced on the S5000.
ip igmp immediate-leave
Enable IGMP immediate leave.
S5000
Syntax
ip igmp immediate-leave [group-list prefix-list-name]
To disable ip igmp immediate leave, use the no ip igmp immediate-
leave command.
Parameters
group-list
prefix-list-
name
Enter the keywords group-list followed by a string up to
16 characters long of the prefix-list-name.
Defaults Not configured.
Command
Modes
INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Querier normally sends a certain number of group-specific queries when a leave
message is received for a group prior to deleting a group from the membership
database. There may be situations when you require immediate deletion of a group
from the membership database. This command provides a way to achieve the
immediate deletion. In addition, this command provides a way to enable
immediate-leave processing for specified groups.
498
Internet Group Management Protocol (IGMP)