Reference Guide

boot Modify system boot parameters
bpdu-destination-mac-address Use Provider Bridge Address
for xStp/Gvrp
cam-acl Configure CAM ACL
cam-audit Configure CAM auditing
parameters
cam-acl-egress Configure Egress CAM ACL
cam-optimization Optimize Cam utilization
class-map Configure Class Map for QoS
clock Configure time-of-day clock
configuration Enables exclusive
configuration mode
crypto SSH key generation and IPSec
policy configuration
control-plane-cpuqos Control plane CPU Qos
configuration
default Set a command to its default
default-vlan Change flooding on default vlan
define Interface range macro
definition
dot1x Configure 802.1x
ecmp-group ECMP group configuration
enable Modify enable password
parameters
end Exit from configuration mode
ethernet Ethernet options
exit Exit from configuration mode
fastpatch Process runtime patch
fefd-global Enable FEFD globally
ftp-server FTP configuration subcommands
garp Configure GARP parameters
hash-algorithm Hash algorithm command
hg-link-bundle-monitor Configure HiGig Link Bundle
Monitoring
hostname Set system's network name
http-server Configure the HTTP server
interface Select an interface to
configure
ip Global IP configuration
subcommands
ipv6 Global IPv6 configuration
subcommands
lacp Configure LACP
line Configure a terminal line
linecard Configure linecard
link-bundle-distribution Configure link-bundle
load-balance Global traffic load-balance
configuration
logging Modify message logging
facilities
mac Global MAC configuration
subcommands
mac-address-table Mac Address Table
Configuration Subcommands
management Create a management crypto or
route, etc
monitor Monitor monitored ports
no Reset a command
ntp Configure NTP
openflow Configure OpenFlow instance
password-attributes Configure password attributes
policy-map-input Configure input QoS policy map
policy-map-output Configure output QoS policy map
port-channel Configure port-channel group
CLI Basics
49