Reference Guide

show gvrp
Display the GVRP configuration.
S5000
Syntax
show gvrp [brief | interface-type slot/port]
Parameters
brief (OPTIONAL) Enter the keyword brief to display a brief
summary of the GVRP configuration.
interface-type
slot/port
(OPTIONAL) Enter the interface type followed by slot/port or
number information. Valid slot numbers are 0-11. The valid
port numbers for each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
If no ports are GVRP participants, the message output changes from GVRP
Participants running on <port_list> to GVRP Participants running
on no ports
.
Example
R3#show gvrp brief
GVRP Feature is currently enabled.
Port GVRP Status Edge-Port
----------------------------------------------
Te 3/0 Disabled No
Te 3/1 Disabled No
Te 3/2 Enabled No
Te 3/3 Disabled No
Te 3/4 Disabled No
Te 3/5 Disabled No
Te 3/6 Disabled No
Te 3/7 Disabled No
Te 3/8 Disabled No
R3#show gvrp brief
486
GARP VLAN Registration (GVRP)