Reference Guide

transit Enter the keywordtransit to set the Ring node to Transit
mode.
Defaults Mode None
Command
Modes
CONFIGURATION (conf-frrp)
Command
History
Version 9.0(1.3) Introduced on the S5000.
protocol frrp
Enter the Resilient Ring Protocol and designate a ring identification.
S5000
Syntax
protocol frrp {ring-id}
To exit the ring protocol, use the no protocol frrp {ring-id} command.
Parameters
ring-id Enter the ring identification number. Range: 1 to 255.
Defaults none
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
This command places you into the resilient ring protocol. After executing this
command, the command line prompt changes to conf-frrp.
show frrp
Display the Resilient Ring Protocol configuration.
S5000
Syntax
show frrp [ring-id [summary]] | [summary]
Parameters
ring-id Enter the ring identification number. The range is 1 to 255
summary (OPTIONAL) Enter the keyword summary to view just a
summarized version of the Ring configuration.
476
Force10 Resilient Ring Protocol (FRRP)