Reference Guide

Command
Modes
CONFIGURATION (conf-frrp)
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Because the resilient ring protocol can potentially transmit 20 packets per
interface, you must restrict debug information.
member-vlan
Specify the member VLAN identification numbers.
S5000
Syntax
member-vlan {vlan-range}
To return to the default, use the no member-vlan [vlan-range] command.
Parameters
vlan-range Enter the member VLANs using VLAN IDs (separated by
commas), a range of VLAN IDs (separated by a hyphen), a
single VLAN ID, or a combination. For example: VLAN IDs
(comma-separated): 3, 4, 6. Range (hyphen-separated):
5-10. Combination: 3, 4, 5-10, 8.
Defaults none
Command
Modes
CONFIGURATION (conf-frrp)
Command
History
Version 9.0(1.3) Introduced on the S5000.
mode
Set the Master or Transit mode of the ring.
S5000
Syntax
mode {master | transit}
To reset the mode, use the no mode {master | transit} command.
Parameters
master Enter the keyword master to set the Ring node to Master
mode.
Force10 Resilient Ring Protocol (FRRP)
475