Reference Guide

Usage
Information
The maximum number of FCoE VLANs supported on the switch is eight.
fip-snooping fc-map
Configure the FC-MAP value FIP snooping uses on all VLANs.
S5000
Syntax
fip-snooping fc-map fc-map-value
To remove the configured FM-MAP value, use the no fip-snooping fc-map
command.
Parameters
fc-map-value Enter the FC-MAP value FIP snooping uses. The range is
0EFC00 to 0EFCFF.
Defaults 0x0EFC00
Command
Modes
• CONFIGURATION
• VLAN INTERFACE
Command
History
Version 9.0(1.3) Introduced on the S5000.
fip-snooping max-sessions-per-enodemac
Configure the maximum number of FIP-snooping sessions supported on the switch for an ENode MAC
address.
S5000
Syntax
fip-snooping max-sessions-per-enodemac max-value
To remove the configured number of supported sessions, use the no fip-
snooping max—sessions-per-enodemac
command.
Parameters
max-value Enter the maximum number of FIP snooping sessions with
an ENode that are supported on the switch. The range is 1 to
64.
Defaults 32
462
FCoE Transit