Reference Guide

Parameters
type Enter the NETBIOS node type:
• Broadcast: Enter the keyword b-node.
• Hybrid: Enter the keyword h-node.
• Mixed: Enter the keyword m-node.
• Peer-to-peer: Enter the keyword p-node.
Defaults Hybrid
Command
Modes
DHCP <POOL>
Command
History
Version 9.0(1.3) Introduced on the S5000.
network
Specify the range of addresses in an address pool.
S5000
Syntax
network network /prefix-length
Parameters
network/
prefix-length
Specify a range of addresses. Prefix-length range is 17 to 31.
Defaults none
Command
Modes
DHCP <POOL>
Command
History
Version 9.0(1.3) Introduced on the S5000.
pool
Create an address pool.
S5000
Syntax
pool name
Parameters
name Enter the address pool’s identifying name.
Dynamic Host Configuration Protocol (DHCP)
443