Reference Guide

hardware-address
For manual configurations, specify the client hardware address.
S5000
Syntax
hardware-address address
Parameters
address Enter the hardware address of the client.
Defaults none
Command
Modes
DHCP <POOL>
Command
History
Version 9.0(1.3) Introduced on the S5000.
host
For manual (rather than automatic) configurations, assign a host to a single-address pool.
S5000
Syntax
host address
Parameters
address/mask Enter the host IP address and subnet mask.
Defaults none
Command
Modes
DHCP <POOL>
Command
History
Version 9.0(1.3) Introduced on the S5000.
lease
Specify a lease time for the addresses in a pool.
S5000
Syntax
lease {days [hours] [minutes] | infinite}
Dynamic Host Configuration Protocol (DHCP)
441