Reference Guide

domain-name
Assign a domain to clients based on the address pool.
S5000
Syntax
domain-name name
Parameters
name Give a name to the group of addresses in a pool.
Defaults none
Command
Modes
DHCP <POOL>
Command
History
Version 9.0(1.3) Introduced on the S5000.
excluded-address
Prevent the server from leasing an address or range of addresses in the pool.
S5000
Syntax
excluded-address [address | low-address high-address]
Parameters
address Enter a single address to be excluded from the pool.
low-address Enter the lowest address in a range of addresses to be
excluded from the pool.
high-address Enter the highest address in a range of addresses to be
excluded from the pool.
Defaults none
Command
Modes
DHCP
Command
History
Version 9.0(1.3) Introduced on the S5000.
440
Dynamic Host Configuration Protocol (DHCP)