Reference Guide

2 - -
3 - -
4 - -
5 - -
6 - -
7 - -
8 - -
Stack unit 1 stack port all
Max Supported TC Groups is 4
Number of Traffic Classes is 1
Admin mode is on
Admin Parameters:
--------------------
Admin is enabled
TC-grp Priority# Bandwidth TSA
------------------------------------------------
0 0,1,2,3,4,5,6,7 100% ETS
1 - -
2 - -
3 - -
4 - -
5 - -
6 - -
7 - -
8 - -
show stack-unit stack-ports pfc detail
Displays the PFC configuration applied to ingress traffic on stacked ports, including PFC Operational
mode on each unit with the configured priorities, link delay, and number of pause packets sent and
received.
S5000
Syntax
show stack-unit {unit-number | all } stack-ports all pfc detail
Parameters
stack-unit unit-
number
Enter the keyword stack-unit followed by a number. The
range is 0 to 11.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
To clear the PFC TLV counters, use the clear pfc counters stack-unit
{ unit-id | all } stack-ports all command.
Example
(Summary)
Dell(conf)# show stack-unit all stack-ports all pfc detail
stack unit 0 stack-port all
Admin mode is On
Admin is enabled, Priority list is 4-5
Local is enabled, Priority list is 4-5
Data Center Bridging (DCB)
435