Reference Guide

Field Description
Admin Parameters ETS configuration on local port, including priority
groups, assigned dot1p priorities, and bandwidth
allocation.
Remote Parameters ETS configuration on remote peer port, including
admin mode (enabled if a valid TLV was received or
disabled), priority groups, assigned dot1p priorities,
and bandwidth allocation. If ETS admin mode is
enabled on the remote port for DCBx exchange,
the Willing bit received in ETS TLVs from the
remote peer is included.
Local Parameters ETS configuration on local port, including admin
mode (enabled when a valid TLV is received from a
peer), priority groups, assigned dot1p priorities, and
bandwidth allocation.
Operational status (local
port)
Port state for current operational ETS
configuration:
• Init: Local ETS configuration parameters were
exchanged with the peer.
• Recommend: Remote ETS configuration
parameters were received from the peer.
• Internally propagated: ETS configuration
parameters were received from the
configuration source.
ETS DCBx Oper status DCBx operational status of the ETS configuration
on the local port: up (match) or down (mismatch).
Reason: Displays when DCBx operational status for ETS on
a port is down. For a description of each reason,
refer to the DCB chapter in the S5000
Configuration Guide.
State Machine Type Type of state machine used for DCBx exchanges of
ETS parameters: Feature — for legacy DCBx
versions; Asymmetric — for an IEEE version.
Conf TLV Tx Status Status of ETS Configuration TLV advertisements:
enabled or disabled.
Reco TLV Tx Status Status of ETS Recommendation TLV
advertisements: enabled or disabled.
Input Conf TLV pkts Number of ETS Configuration TLVs received.
Output Conf TLV pkts Number of ETS Configuration TLVs transmitted.
Error Conf TLV pkts Number of ETS Error Configuration TLVs received.
Input Reco TLV pkts Number of ETS Recommendation TLVs received.
Output Reco TLV pkts Number of ETS Recommendation TLVs
transmitted.
Data Center Bridging (DCB)
427