Reference Guide

clear ets counters
Clear all ETS TLV counters on an interface.
S5000
Syntax
clear ets counters interface-type slot/port
Parameters
interface-type
slot/port
Enter one of the following interface types and slot/port
information. Valid slot numbers are 0-11. The valid port
numbers for each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
clear pfc counters
Clear the PFC TLV counters and PFC statistics on an interface or stack unit.
S5000
Syntax
clear pfc counters {[interface-type slot/port | stack-unit]
[unit-number | all ] [stack-ports all]}
Parameters
interface-type
slot/port
Enter one of the following keywords and slot/port or number
information. Valid slot numbers are 0-11. The valid port
numbers for each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
Data Center Bridging (DCB)
409