Reference Guide

Usage
Information
You must create a policy-map by associating a queue number with the qos-policy.
You must create QoS policies prior to enabling this command.
Related
Commands
qos-policy-input – creates a QoS input policy map.
class-map – creates a QoS class map.
policy-map-input – creates an input policy map.
service-policy rate-limit-protocols
Apply a policy for the system to rate limit control protocols on a per-protocol basis.
S5000
Syntax
service-policy rate-limit-protocols policy-name
Parameters
policy-name Enter the service-policy name, using a string up to 140
characters.
Defaults Not configured.
Command
Modes
CONTROL-PLANE-CPUQOS
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
This command applies the service-policy based on the type of protocol defined in
the ACL rules.
You must create ACL and QoS policies prior to enabling this command.
Related
Commands
ip access-list extended – creates an extended IP ACL.
ipv6 access-list – creates an IPv6 ACL.
mac access-list extended – creates an extended MAC ACL.
qos-policy-input – creates a QoS input policy map.
class-map – creates a QoS class map.
policy-map-input – creates an input policy map.
402
Control Plane Policing (CoPP)