Reference Guide

Command
History
Version 9.0(1.3) Introduced for the S5000.
Usage
Information
Use the show reload-type command to check the currently configured Auto-
Configuration mode (Jumpstart or Normal reload) on a switch running BMP 2.0.
You can also use the show bootvar command to display the current Reload
mode for BMP 2.0 with the path of the Dell Networking OS image file retrieved
from a DHCP server.
Example
Dell#show reload-type
Reload-Type : normal-reload [Next boot : normal-reload]
Related
Commands
reload type – configures Reload mode as normal or Jumpstart.
stop jump-start
Stop the switch from reloading in Jumpstart mode to prevent an infinite loop.
S5000
Syntax
stop jump-start
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced for the S5000.
Usage
Information
Use the stop jump-start command on a switch running BMP 2.0 if the switch
enters a loop while reloading in Jumpstart mode; loop occurs when the switch is
continuously trying to contact a DHCP server and a DHCP server is not found. The
stop jump-start command stops the switch from connecting to the DHCP
server. After you use the
stop jump-start command, the next default reload
type is a normal reload. This is indicated in the show reload-type command.
Related
Commands
reload type – configures Rload mode as normal or Jumpstart.
Bare Metal Provisioning (BMP)
393