Reference Guide

Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
If there is a type or sub-type that is not well-known, it is displayed
as:TTSS:XX:YYYY.
Where TT is type, SS is sub-type displayed in hexadecimal format, XX:YYYY is the
value divided into 2-byte and 4-byte values in decimal format. This format is
consistent with other vendors.
For example, if the extended community has type 0x04, sub-type 0x05, value 0x20
00 00 00 10 00, it displays as:0x0405:8192:4096.
Non-transitive extended communities are marked with an asterisk.
Example
Dell#show ip bgp ipv4 multicast extcommunity-list
BGP routing table entry for 192.168.1.0/24, version 2
Paths: (1 available, table Default-IP-Routing-Table.)
Not advertised to any peer
Received from :
100.100.1.2 (2.4.0.1) Best
AS_PATH : 200
Next-Hop : 100.100.1.2, Cost : 0
Origin IGP, Metric 4294967295 (Default), LocalPref 100,
Weight 0,
external
Communities :
300:400 500:600
Extended Communities :
RT:1111:4278080 SoO:35:4 SoO:36:50529043 SoO:37:50529044
SoO:38:50529045 SoO:0.0.0.2:33 SoO:506.62106:34
0x0303:254:11223*
Dell#
show ip bgp paths extcommunity
Use this feature to display all BGP paths having extended community attributes.
S5000
Syntax
show ip bgp paths extcommunity
Parameters
The following describes the show ip bgp paths extcommunity command
shown in the Example below.
Address Displays the internal address where the path attribute is
stored.
388
Border Gateway Protocol IPv4 (BGPv4)