Reference Guide

Notification History
'Connection Reset' Sent : 1 Recv: 0
Local host: 100.10.10.1, Local port: 179
Foreign host: 25.25.25.25, Foreign port: 2290
BGP neighbor is 211.1.1.129, remote AS 640, external link
BGP version 4, remote router ID 0.0.0.0
BGP state ACTIVE, in this state for 00:00:36
Last read 00:00:41, hold time is 180, keepalive interval is
60 seconds
Received 28 messages, 0 notifications, 0 in queue
Sent 6 messages, 3 notifications, 0 in queue
Received 18 updates, Sent 6 updates
Route refresh request: received 0, sent 0
Minimum time between advertisement runs is 30 seconds
For address family: IPv4 Multicast
BGP table version 14, neighbor version 0
0 accepted prefixes consume 0 bytes
Prefix advertised 0, rejected 0, withdrawn 0
Connections established 3; dropped 3
Last reset 00:00:37, due to user reset
Notification History
'Connection Reset' Sent : 3 Recv: 0
Related
Commands
show ip bgp – views the current BGP routing table.
show ip bgp peer-group
Allows you to view information on the BGP peers in a peer group.
S5000
Syntax
show ip bgp ipv4 multicast peer-group [peer-group-name [detail
| summary]]
Parameters
peer-group-
name
(OPTIONAL) Enter the name of a peer group to view
information about that peer group only.
detail (OPTIONAL) Enter the keyword detail to view detailed
status information of the peers in that peer group.
summary (OPTIONAL) Enter the keyword summary to view status
information of the peers in that peer group. The output is the
same as that found in the show ip bgp summary
command.
Command
Modes
• EXEC
• EXEC Privilege
378
Border Gateway Protocol IPv4 (BGPv4)