Reference Guide

maximum Enter a number as the maximum number of prefixes allowed
for this BGP router. The range is 1 to 4294967295.
threshold (OPTIONAL) Enter a number to be used as a percentage of
the maximum value. When the number of prefixes reaches
this percentage of the maximum value, the S5000 software
sends a message. The range is 1 to 100 percent. The default
is 75.
warning-only (OPTIONAL) Enter the keyword warning-only to set the
router to send a log message when the maximum value is
reached. If this parameter is not set, the router stops peering
when the maximum number of prefixes is reached.
Defaults threshold = 75
Command
Modes
ROUTER BGP Address Family (conf-router_bgp_af)
Command
History
Version 9.0(1.3) Introduced on the S5000.
neighbor next-hop-self
Allows you to configure the router as the next hop for a BGP neighbor.
S5000
Syntax
neighbor {ip-address | peer-group-name} next-hop-self
To return to the default setting, use the no neighbor {ip-address | peer-
group-name} next-hop-self command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal
format.
peer-group-
name
Enter the name of the peer group.
Defaults Disabled.
Command
Modes
ROUTER BGP Address Family (conf-router_bgp_af)
Command
History
Version 9.0(1.3) Introduced on the S5000.
364
Border Gateway Protocol IPv4 (BGPv4)