Reference Guide

peer-group-
name
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
seconds Enter a number as the time interval, in seconds, between
BGP advertisements. The range is 0 to 600 seconds. The
default is 5 seconds for internal BGP peers and 30 seconds
for external BGP peers.
Defaults
• seconds = 5 seconds (internal peers)
• seconds = 30 seconds (external peers)
Command
Modes
ROUTER BGP Address Family (conf-router_bgp_af)
Command
History
Version 9.0(1.3) Introduced on the S5000.
neighbor default-originate
Inject the default route to a BGP peer or neighbor.
S5000
Syntax
neighbor {ip-address | peer-group-name} default-originate
[route-map map-name]
To remove a default route, use the no neighbor {ip-address | peer-
group-name
} default-originate command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
peer-group-
name
Enter the name of the peer group to set the default route of
all routers in that peer group.
route-map
map-name
(OPTIONAL) Enter the keyword route-map followed by the
name of a configured route map.
Defaults Not configured.
Command
Modes
ROUTER BGP Address Family (conf-router_bgp_af)
Command
History
Version 9.0(1.3) Introduced on the S5000.
Border Gateway Protocol IPv4 (BGPv4)
361