Reference Guide

show ip bgp neighbors
Allows you to view the information exchanged by BGP neighbors.
S5000
Syntax
show ip bgp [ipv4 unicast] neighbors [ip-address [advertised-
routes | dampened-routes | detail | flap-statistics | routes |
{received-routes [network [network-mask]]} | {denied-routes
[network [network-mask]]}]
Parameters
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
ip-address (OPTIONAL) Enter the IP address of the neighbor to view
only BGP information exchanged with that neighbor.
advertised-
routes
(OPTIONAL) Enter the keywords advertised-routes to
view only the routes the neighbor sent.
dampened-
routes
(OPTIONAL) Enter the keywords dampened-routes to view
information on dampened routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-
specific internal information for the IPv4 Unicast address
family.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view
flap statistics on the neighbor’s routes.
routes (OPTIONAL) Enter the keyword routes to view only the
neighbor’s feasible routes.
received-
routes
[network
[network-mask]
(OPTIONAL) Enter the keywords received-routes
followed by either the network address (in dotted decimal
format) or the network mask (in slash prefix format) to view
all information received from neighbors.
NOTE: You must configure the neighbor soft-
reconfiguration inbound command prior to
viewing all the information received from the neighbors.
denied-routes
[network
[network-mask]
(OPTIONAL) Enter the keywords denied-routes followed
by either the network address (in dotted decimal format) or
the network mask (in slash prefix format) to view all
information on routes denied via neighbor inbound filters.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Border Gateway Protocol IPv4 (BGPv4)
337