Reference Guide

Parameters
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
cluster-id (OPTIONAL) Enter the cluster id in dotted decimal format.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes the show ip bgp cluster-list command shown in
the Example below.
Field Description
Network Displays the destination network prefix of each BGP route.
Next Hop Displays the next hop address of the BGP router. If 0.0.0.0 is
listed in this column, then local routes exist in the routing
table.
Metric Displays the BGP route’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight.
Path Lists all the ASs the route passed through to reach the
destination network.
Example
Dell#show ip bgp cluster-list
BGP table version is 64444683, local router ID is 120.1.1.1
Status codes: s suppressed, d damped, h history, * valid, >
best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed, n
- network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
* I 10.10.10.1/32 192.68.16.1 0 100 0 i
* I 192.68.16.1 0 100 0 i
*>I 192.68.16.1 0 100 0 i
* I 192.68.16.1 0 100 0 i
* I 192.68.16.1 0 100 0 i
* I 192.68.16.1 0 100 0 i
* I 10.19.75.5/32 192.68.16.1 0 100 0 ?
* I 192.68.16.1 0 100 0 ?
*>I 192.68.16.1 0 100 0 ?
* I 192.68.16.1 0 100 0 ?
* I 192.68.16.1 0 100 0 ?
* I 192.68.16.1 0 100 0 ?
* I 10.30.1.0/24 192.68.16.1 0 100 0 ?
* I 192.68.16.1 0 100 0 ?
*>I 192.68.16.1 0 100 0 ?
* I 192.68.16.1 0 100 0 ?
Border Gateway Protocol IPv4 (BGPv4)
325