Reference Guide

neighbor local-as
Configure Internal BGP (IBGP) routers to accept external routes from neighbors with a local AS number in
the AS number path.
S5000
Syntax
neighbor {ip-address | peer-group-name} local-as as-number [no-
prepend]
To return to the default value, use the no neighbor {ip-address | peer-
group-name} local-as command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal
format.
peer-group-
name
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
as-number Enter the AS number to reset all neighbors belonging to that
AS. The range is 0 to 65535 (2-byte), 1 to 4294967295 (4-
byte) or 0.1 to 65535.65535 (dotted format).
no prepend Specifies that local AS values do not prepend to
announcements from the neighbor.
Defaults Not configured.
Command
Modes
ROUTER BGP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
bgp four-octet-as-support – enables 4-byte support for the BGP process.
neighbor maximum-prefix
Control the number of network prefixes received.
S5000
Syntax
neighbor {ip-address | peer-group-name} maximum-prefix maximum
[threshold] [warning-only]
To return to the default values, use the no neighbor {ip-address | peer-
group-name} maximum-prefix maximum command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal
format.
304
Border Gateway Protocol IPv4 (BGPv4)