Reference Guide

Command
History
Version 9.0(1.3) Introduced on the S5000.
debug ip bgp events
Display information on local BGP state changes and other BGP events.
S5000
Syntax
debug ip bgp [ip-address | peer-group peer-group-name] events
[in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name] events command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
peer-group
peer-group-
name
(OPTIONAL) Enter the keyword peer-group followed by the
name of the peer group.
in (OPTIONAL) Enter the keyword in to view only events on
inbound BGP messages.
out (OPTIONAL) Enter the keyword out to view only events on
outbound BGP messages.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Enter the no debug ip bgp command to remove all configured debug
commands for BGP.
debug ip bgp keepalives
Display information about BGP keepalive messages.
S5000
Syntax
debug ip bgp [ip-address | peer-group peer-group-name]
keepalives [in | out]
Border Gateway Protocol IPv4 (BGPv4)
289