Reference Guide

peer-group
peer-group-
name
Enter the keywords peer-group followed by the name of
the peer group.
in (OPTIONAL) Enter the keyword in to view only information
on inbound BGP routes.
out (OPTIONAL) Enter the keyword out to view only information
on outbound BGP routes.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
To view information on both incoming and outgoing routes, do not include the in
and out parameters in the debugging command. The in and out parameters
cancel each other; for example, if you enter the debug ip bgp in command and
then enter the debug ip bgp out command, you will not see information on the
incoming routes.
Entering a no debug ip bgp command removes all configured debug
commands for BGP.
Related
Commands
debug ip bgp events – views information about BGP events.
debug ip bgp keepalives – views information about BGP keepalives.
debug ip bgp notifications – views information about BGP notifications.
debug ip bgp updates – views information about BGP updates.
show debugging – views enabled debugging operations.
debug ip bgp dampening
View information on routes being dampened.
S5000
Syntax
debug ip bgp ipv4 multicast dampening
To disable debugging, use the no debug ip bgp ipv4 multicast dampening
command.
Parameters
dampening Enter the keyword dampening to clear route flap dampening
information.
Command
Modes
EXEC Privilege
288
Border Gateway Protocol IPv4 (BGPv4)