Reference Guide

Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
If you enter the clear ip bgp flap-statistics command without any
parameters, all statistics are cleared.
Related
Commands
show debugging – views the enabled debugging operations.
show ip bgp flap-statistics – views the BGP flap statistics.
undebug all – disables all debugging operations.
clear ip bgp peer-group
Reset a peer-group’s BGP sessions.
S5000
Syntax
clear ip bgp peer-group peer-group-name
Parameters
peer-group-
name
Enter the peer group name to reset the BGP sessions within
that peer group.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
debug ip bgp
Display all information on BGP, including BGP events, keepalives, notifications, and updates.
S5000
Syntax
debug ip bgp [ip-address | peer-group peer-group-name] [in |
out]
To disable all BGP debugging, use the no debug ip bgp command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal
format.
Border Gateway Protocol IPv4 (BGPv4)
287