Reference Guide

dampening (OPTIONAL) Enter the keyword dampening to reset route
flap dampening information on that neighbor.
flap-statistics (OPTIONAL) Enter the keyword flap-statistics to reset
the flap statistics on all prefixes from that neighbor.
ipv4 (OPTIONAL) Enter the keyword ipv4 to select options for
that address family.
ipv6 (OPTIONAL) Enter the keyword ipv6 to select options for
that address family.
soft (OPTIONAL) Enter the keyword soft to configure and
activate policies without resetting the BGP TCP session, that
is, BGP Soft Reconfiguration.
NOTE: If you enter the clear ip bgp ip-address
soft command, both inbound and outbound policies
are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound
policies.
out (OPTIONAL) Enter the keyword out to activate only
outbound policies.
peer-group
peer-group-
name
(OPTIONAL) Enter the keyword peer-group followed by the
peer group name to reset the BGP sessions within that peer
group.
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
bgp recursive-bgp-next-hop – disables next-hop resolution through other routes
learned by the BGP.
bgp soft-reconfig-backup – turns on BGP Soft Reconfiguration.
clear ip bgp dampening
Clear information on route dampening and return the suppressed route to the Active state.
S5000
Syntax
clear ip bgp dampening [ip-address mask]
Parameters
ip-address
mask
(OPTIONAL) Enter an IP address in dotted decimal format
and the prefix mask in slash format (/x) to clear dampening
information only for that BGP neighbor.
Border Gateway Protocol IPv4 (BGPv4)
285