Reference Guide

Example
Dell(conf)#router bgp 1
Dell(conf-router_bgp)#bgp asnotation asdot
Dell(conf-router_bgp)#ex
Dell(conf)#do show run | grep bgp
router bgp 1
bgp four-octet-as-support
bgp asnotation asdot
Dell(conf)#router bgp 1
Dell(conf-router_bgp)#bgp asnotation asdot+
Dell(conf-router_bgp)#ex
Dell(conf)#do show run | grep bgp
router bgp 1
bgp four-octet-as-support
bgp asnotation asdot+
Dell(conf)#router bgp 1
Dell(conf-router_bgp)#bgp asnotation asplain
Dell(conf-router_bgp)#ex
Dell(conf)#do show run |grep bgp
router bgp 1
bgp four-octet-as-support
Dell(conf)#
Related
Commands
bgp four-octet-as-support – enables 4-byte support for the BGP process.
bgp bestpath as-path ignore
Ignore the AS PATH in BGP best path calculations.
S5000
Syntax
bgp bestpath as-path ignore
To return to the default, enter the no bgp bestpath as-path ignore
command.
Defaults Disabled (that is, the software considers the AS_PATH when choosing a route as
best).
Command
Modes
ROUTER BGP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
If you enable this command, use the clear ip bgp * command to recompute
the best path.
Border Gateway Protocol IPv4 (BGPv4)
269