Reference Guide

show bfd neighbors
Display BFD neighbor information on all interfaces or a specified interface.
S5000
Syntax
show bfd neighbors interface-type slot/port [detail]
Parameters
interface-type
slot/port
Enter the interface type followed by slot/port or number
information. Valid slot numbers are 0-11. The valid port
numbers for each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are
48, 52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
• For a VLAN interface, enter the keyword vlan followed
by a VLAN id number from 1 to 4094.
detail (OPTIONAL) Enter the keyword detail to view detailed
information about BFD neighbors.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example
Dell#show bfd neighbors
* - Active session role
Ad Dn - Admin Down
B - BGP
C - CLI
I - ISIS
O - OSPF
R - Static Route (RTM)
LocalAddr RemoteAddr Interface State Rx-int Tx-int Mult
Clients
* 10.1.3.2 10.1.3.1 Te 1/3 Up 300 250 3 C
Example
(Detail)
Dell#show bfd neighbors detail
Session Discriminator: 1
Neighbor Discriminator: 1
Local Addr: 10.1.3.2
Local MAC Addr: 00:01:e8:02:15:0e
262
Bidirectional Forwarding Detection (BFD)