Reference Guide

level-2 Enter the keyword level-2 to redistribute matched routes
to IS-IS Level 2.
stub-area Enter the keyword stub to redistributed matched routes to
OSPF stub areas.
Defaults Not configured.
Command
Modes
ROUTE-MAP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
set automatic-tag – computes the tag value of the route.
set metric – specifies the metric value assigned to redistributed routes.
set metric-type – specifies the metric type assigned to redistributed routes.
set tag – specifies the tag assigned to redistributed routes.
set local-preference
Configure a filter to set the BGP LOCAL_PREF attribute for routers within the local autonomous system.
S5000
Syntax
set local-preference value
Parameters
value Enter a number as the LOCAL_PREF attribute value. The
range is 0 to 4294967295.
Defaults Not configured.
Command
Modes
ROUTE-MAP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The set local-preference command changes the LOCAL_PREF attribute for
routes meeting the route map criteria. To change the LOCAL_PREF for all routes,
use the bgp default local-preference command.
Related
Commands
bgp default local-preference – changes the default LOCAL_PREF attribute for all
routes.
Access Control Lists (ACL)
247